Important!!! Please select suitable plug for equipment in ACCESSORIES column, or GetOptic will select according to your country's standard.

Usage:

• Ideal for drilling holes in glass and plastic lenses.
• Opposing taper drill bits system allow holes to be drilled from both sides simultaneously for precision placement and avoids chipping and breaking of all lenses, especially those made of glass.
• After hole drilled, placed the lens under reamer and lifted dpwards to be enlarged to desired size.
• Adjustable lens support arm with suction cup to maintai the correct drilling angle.

Features:

1. Suitable for mineral, plastic(CR-39) and polycarbonate lenses
2. Two-sided drilling system with powerful but little-noise motor
3. Suction lens holder, Slope and position of the hole adjustable
4. Inside diameter of the hole accurately adjusted by readable scals

Specifications:

• Diameter of the hole:0.8-2.8mm Dimensions
• Dimensions: 190(L)mm × 145(W)mm × 280(H)mm
• Power Requirement:100-120V/60Hz AC or 200-240V/50Hz AC 50W